The working standard of the drying oven:
1. Working temperature:50-140℃(can be adjusted according to the requirement)
2. The total air flow of the hot air circulation is 3450x2=6900 m3/H
3. Heating source : electrical heating heating power: 15kw
4. Max capacity: 120kg/batch
Requirement for the material:
1. The internal wall uses 0.8mm stainless steel and the external wall use 1.2mm stainless steel. The frame was hold by the 5# angle iron
2. The drying cart was made by 38*38 or 38*25 stainless steel cube tube,the side rail was made by δ1.5 mm board stainless steel.
3. The drying tray was 0.5mm hand made plate.The size of the drying plate is 6408460*45mm.
4. Aluminum silicate heating preservation cotton is used for heating preservation. The thickness is 80mm.
5. The drying door sealing uses food grade silicone rubber circle (can be customized)
1. The drying oven was assembled , the gap between the top and oven is no more than 2mm.
2. The rising of the temperature after continuously working for 3 hour or longer can be more than 40℃
3. The working noise can be no more than 72dB.
1.working volume:2.4(m³) :2.4
2.Air fan volume:3450x2=6900(m³/h)
3.power of automatic fan:0.45kw/set
4.Adopt drying trays: 640x460x45 48pcs
High heating efficiency
By means of forced air blast, the drying chamber can dry materials evenly.
Multiple heating resources, e.g. steam, electricity
Low noise, balanced operation, and easy temperature control, installation and maintenance.
Heating, solidification, drying and dehydration of drugs, chemicals, food, agricultural and sideline products,
marine products, e.g. raw medicines, crude drugs, traditional Chinese medicines prepared in ready-to-use forms, extracturms, powders, granular drugs, packing bottles, pigments, dyestuff, vegetables, melons
and fruits,pineapples,mangoes,sausages, plastic resins, electronic components and coatings.
1 For the heating source, there are many kinds: steam, electrical, or steam and electrical to be chosen.
2 The used temperatures to be used: steam heating 50-140°C, Max.150°C.
3 The moisture while using the electrical or temperature: 50-350°C.
4 There are the automatic control system and the computer control system for users’ selection.
5 Commonly used steam pressure 0.02-0.08 Mpa(0.2-8kg/cm2)
6 If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.
7 The special requirements should be indicated at the time of order.
8 The price for the non-standard oven should be consulted.
9 The use temperatures more than 140°C and less than 60°C should be indicated at the time of order.
Number of Trolley
Area of the plates