This machine is suitable for the packaging of small grain items such as instant noodle soup, granules, desiccant, broken tea and granule tea.
Features of this machine:
This machine can automatically complete the functions of bag making, filling, metering, sealing, cutting, counting, stepless speed regulation and so on. The configuration of the accessories of the machine can complete functions such as shock cutting, date printing, and easy tearing.
polypropylene / polyethylene, aluminum foil / polyethylene, polyester / aluminized / polyethylene, nylon / reinforced polyethylene, paper / polyethylene, filter paper and so on.
Max film width
Bag making Length
Bag making Width
220V 50/60Hz 2Kw
The machine also can combine with weighing system, such as :
1, multi-head weigher device (granule)
2, measuring cups(granule)
3, auger filler device(powder)
4, piston liquid filling device(liquid)
5, manual feeding conveyor device
Maintenance of the granule packing machine is essential for long-term use.
1. The tank part of the machine is equipped with oil meter. It should be refueled once before driving. It can be added in the middle according to the temperature rise and operation of each bearing.
2. The worm gear box must store the oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it must be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow around the machine and on the ground. Because oil is easy to contaminate materials, affecting product quality.
1. Regularly inspect the machine parts once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.