1. It is not possible to prevent other debris near the chopper, and prevent it from entering into it at high speed and causing danger.
2. Before the equipment is running, it must be ensured that all the work is normal and the pot lid is covered properly, otherwise the equipment will run poorly.
3. If a gambling plug occurs during feeding, do not enter the pot by hand to press the material, otherwise it will be dangerous to touch the rotating knife. If the rotor motor is obviously overloaded, it is recommended that the rotor use a low speed and reduce the knife speed.
4. Keep the chopping machine clean and equipment dry, so as not to cause short circuit of the line.