Banner
Home > News > Content

How Is The Powder Packaging Machine Installed?

Dec 28, 2020

1 The automatic powder packaging machine should be installed in a place where the ground is stable and without severe vibration. And avoid direct sunlight on the photoelectric sensor for detecting color mark, so as to avoid the influence of strong light on the photoelectric sensor.

2 After the installation position is determined, the anchor bolts should be adjusted to ensure the stability of the machine.

3 If the local power supply voltage is unstable and exceeds the range of ±10, please consider installing an AC voltage stabilizer to ensure the normal operation of the machine.

4 Before turning on the power of the automatic powder packaging machine, check whether all parts of the machine are in good condition and whether the screws are loose. Whether there is any disconnection in the electrical box, whether the fastening screws are loose, etc.

5 The machine body is connected to the "zero" line (N line) for protection. If the user adopts a three-phase five-wire system, the after-sales service personnel can change the wiring method according to the user's requirements.

6 Turn the drive belt of the main motor of the automatic powder packaging machine by hand to make the distribution shaft rotate one circle. After confirming that there is no jamming or collision of parts, the machine can be powered on.


Back