First, the task of lubrication. The maintenance personnel of the facility should fill the gear meshes of the powder packaging machine, the oil hole of the bearing with a seat and all the moving parts with oil on time. The reducer is not allowed to run without oil. When adding lubricating oil, pay attention not to put the oil tank on the rotating transmission belt to prevent slipping and loss of rotation or premature aging of the transmission belt and damage.
Second, at the maintenance level, before using the powder packaging machine, the screws in each part must be inspected. There must be no looseness, otherwise it will endanger the normal long-distance rotation of the whole machine. Pay attention to the waterproof, moisture-proof, anti-corrosion, and Rat-proof, to ensure the cleanliness of the electrical control box and the wiring terminals to prevent electrical equipment system failures. After shutting down, the two heat sealers should be in the open position to prevent the plastic packaging materials from being burned.
Third, cleaning tasks. Under normal circumstances, after shutting down, the measurement and verification parts should be cleaned immediately, and the heat sealer body should be cleaned frequently to ensure that the sealing lines of the packaged products are clear. The scattered raw materials should be cleaned and tidy immediately to facilitate the cleanliness of the machine parts. Furthermore, the service life can be extended well, and the smoke and dust in the electric control box should be cleaned frequently to prevent electrical equipment system failures such as short circuit or poor contact.
Only by maintaining and scientifically curing the powder packaging machine, can its effect be played well, and the service life is longer. Regarding this matter, users have to maintain the powder packaging machine after purchasing high-quality facilities.