Home > Knowledge > Content

The working principle of the stainless steel hammer crusher

Nov 26, 2019

The working principle of the stainless steel hammer crusher: 

The hammer crusher is adopted. The hammer consists of a fixed outer toothed disc and a high-speed rotating inner disc. The surroundings of the inner disc are not teeth but six T-shaped movable hammers. After the material enters the crushing chamber, it is not only impacted and sheared by 6 T-shaped movable hammers, but also by the external fixed gear. In addition, the materials collide with each other, the particles gradually become smaller, and finally the small particles of the material are in the airflow Push down and enter the powder storage bag through the sieve.

 The size of the sieve of the hammer crusher's special screen determines the filtration fineness, and the user can change the screen as needed. The advantage of the hammer type is that if the material is mixed with an item that is difficult to break for a while, the movable hammer head can be avoided, that is, with soft grams, and after repeated impact shearing, the particle size of the material can be reduced. Hammer mills, especially when there are metal objects in the materials, due to the avoidance of the movable hammer head, the damage to the hammer surface and the tooth surface is small, thus prolonging the service life of the machine. 

304 stainless steel food grinder working principle maintenance instructions:

1. The crushing cavity and the screen must be cleaned in time for each use of the machine. If it is not cleaned in time, the powdery material is prone to agglomeration due to moisture, which will block the screen and affect the discharge.

2. The grinder cannot be washed with water, and can be cleaned with a dry or wet towel.

3. According to the frequency and time of use of the machine, lubricating oil should be added to the oil cup of the bearing seat 5-10 times a month. If you work more than 12 hours a day, you need to add lubricating oil once a day.

4. If the machine is not used for a long time, it should be cleaned and all external power should be cut off at the same time. And carefully check the condition of the machine before using it again, and check that there is no problem before connecting to work.