Home > Knowledge > Content

spiral oil press gear mill life and maintenance

Apr 08, 2020

The gearbox of the oil press is one of the most important parts that make up a host.Together with the motor and the press, three parts are formed. The spiral oil press is a gearbox in addition to the maintenance of the press screw, press bar, and press ring. . The working efficiency of the gear box directly affects the effect of the host machine. Of course, a good gear can also have a longer market life.

The life of a common gear box is about 2 years. Our alloy gear can be replaced for 5 years without replacement, and this gear will only wear out without breaking teeth. The high-density forging process prevents the components from breaking at all. Of course, high costs are inevitable. Generally, the cost of such a reducer gearbox is more than 3000, so the price of the whole machine will be higher than others.

When it comes to maintaining the gear box, it is to replace the gear oil regularly and check it regularly. The most important thing is that it is best to disassemble the gear when the equipment is not used for a long time, clean it up, then grease it and hug it. Of course, this is for those with manual power and mechanical knowledge. If you are a novice or a user who does not have basic machinery, simply clean the butter inside for a long time and then clean it with gasoline, and then install the engine oil to save it. Although it was troublesome at that time, the reducer can be oxidized and aging decelerated when not used for a long time, to maintain the hardness of the material and increase the life by 20%.