Banner
Home > Knowledge > Content

How to use the automatic packaging machine

May 27, 2020

 The automatic packaging machine uses advanced technology to achieve the development pursuit of rapid packaging. The intelligent thermostat is used to ensure that the sealing is beautiful and smooth. It can complete the measurement, feeding, filling, bag making, sealing, and coding with the measuring device. , Cutting bags and other packaging processes, bagging the particles, liquids, powders and other materials to facilitate storage, sales and use. The use method of the automatic packaging machine is actually simple and simple, but it is not complicated.

  1. Installation

  Before turning on the power, make sure that the mechanical position, electrical connection, etc. are installed correctly.

  Color-coded electric eyes, external sensors, etc. are installed in the correct position.

  2. Operation

  After the start signal is input, the packaging machine enters the packaging operation state.

  When the emergency stop signal is input, the packaging machine stops immediately, the screen display is in the emergency stop state, and the rest of the buttons do not respond.

  After the position stop signal is input, the cutter shaft turns to the open position and stops.

  After the jog bag pulling signal is input, the packaging machine is in the bag pulling state until the jog bag pulling signal is cancelled.

  After the jog sealing signal is input, the packaging machine is in the sealing state until the jog sealing signal is cancelled.

  3. Color mark recognition control

  When there is a color mark on the film, the color mark recognition control is set to the enabled state, and the registration is performed by the color mark recognition sensor. However, if no color code command is entered within the effective range of color code recognition, a warning will appear. In this case, the film can be installed again after expanding the effective range of color mark recognition.


Back